By Tony S 2337 Date 2015-03-11 18:35
I have an Allison Daytona truck that's going into paint TOMORROW, and I'm looking for someone with the original stripes still intact. Hoping to get a measurement of the stripe thickness on the front fenders, just at the thinnest point. Also the distance between them. I'm trying to duplicate the original stripes as accurately as possible, and any help would be greatly appreciated! Thanks!
By Tony S 2337 Date 2015-03-14 12:48
Nobody? Paint got put off till Monday. If anyone still has the original stripes, I could really use your help. Thanks!
By glassbuggy Date 2015-03-15 15:47
By glassbuggy Date 2015-03-15 15:57
This is the nose of a regular Daytona and it gives you a better idea of the striping, I think that truck pic I posted has had some work done on the nose as I don't think the white area around the license is factory so here is some better detail
By Tony S 2337 Date 2015-03-16 02:40
By michael c 3832 Date 2015-04-28 02:05
Tony, sorry I never saw this. Hope it all turned out good.
My stripes were generally 3/8 of an inch thick. 3/8 space from top edge of fender, 3/8 space between stripes.
Hope this helps anyone else.
KEEP THE ALLISON STRIPES ALIVE!
Powered by mwForum 2.10.2 © 1999-2007 Markus Wichitill